Canon imageRUNNER ADVANCE C5560i III User Manual page 638

<Match Paper Size>
Adjusts the size of a PDF/XPS file to match the paper size when printing.
Enlarge Print Area
<Enlarge Print Area>
Narrows the blank borders at each side of the page and enlarges the printable area.
N on 1
<N on 1>
Automatically reduces multiple pages to fit on a single page when printing a PDF/XPS file. You can reduce 2,
4, 6, 8, 9, or 16 pages to fit on one page.
<Booklet>
Prints a document with several pages in such a way that the prints are made into a booklet.
Print Comments
<Print Comments>
Adds comments when printing PDF files.
Password to Open Doc.
<Password to Open Doc.>
Prints password protected PDF files by entering the password required to open them.
Skip Blank Pages
<Skip Blank Pages>
Enables you to set the machine to detect blank pages included in documents and not print them.
Enlarge/Reduce
<Enlarge/Reduce>
Enables you to adjust the image size of JPEG and TIFF files to match the paper size when printing.
Image Orientation
<Image Orientation>
Enables you to set the machine to automatically detect the aspect ratio of the image for a JPEG or TIFF file,
and print it vertically or horizontally as required. You can also manually specify to print vertically or
horizontally.
Print Position
<Print Position>
Enables you to set the print position for JPEG and TIFF files to the center or top left of the page when printing.
● For information on file formats, see System Options.
● The number of pages remaining is displayed if a page limit is set with Department ID Management. For
information on setting Department ID Management and page limits, see Configuring the Department ID
Management Settings.
Using Storage Space
624