Canon imageRUNNER ADVANCE C5560i III User Manual page 1111

<Retry Times>
<Function Settings>
You can set the number of times that the machine tries to automatically resend data when the data cannot be
sent because the recipient is busy sending or receiving, or when an error occurs.
● This setting is disabled when sending faxes.
<Data Compression Ratio>
<Function Settings>
You can set the compression ratio for color/grayscale scanned data.
● If you want to select compact or trace & smooth for the PDF file format or select compact for the XPS
file format, it is recommended that you set <Data Compression Ratio> to <Normal> or <Low Ratio>. If
you set it to <High Ratio>, images may be output in low quality even if you select <Quality Priority> in
<Generate File>
● This setting is disabled when sending faxes.
<YCbCr TX Gamma Value>
<Function Settings>
If you are sending a document in color or grayscale, you can specify the gamma value to use when converting
scanned RGB image data to YCbCr. You can reproduce the image with the optimal image quality at the recipient
by setting an appropriate gamma value.
● This setting is disabled for the following file formats:
- PDF (Compact)
- XPS (Compact)
- PDF (Trace&Smooth)
● This setting is disabled when sending to a mail box.
● This setting is disabled when sending faxes.
<Use Divided Chunk Send for WebDAV TX>
<Function Settings>
Settings/Registration
<Send> <Common Settings>
<Send> <Common Settings>
<Image Quality Level for Limited Color/Compact>.
<Send> <Common Settings>
<Send> <Common Settings>
1097