Canon imageRUNNER ADVANCE C5560i III User Manual page 1103

● When <A Mode (Standard)> is set
- The job is canceled if you scan an original with a QR code embedded with <Prohibit All> information
or a QR code embedded with copy restriction information from a non-Canon machine.
● When <B Mode (Secured)> is set
- The job is canceled if you scan an original without a QR code embedded with <Allow All>
information, such as a handwritten note.
● When <Restrict Functions Affecting Document Scan Lock> is set to <On>, the target function is grayed
out and cannot be used. When it is set to <Off>, the job is canceled if you copy/scan/print a document
with a QR code embedded when the target function is set.
<Information Used for LDAP Server Authentication>
<Function Settings>
You can specify the authentication method for accessing an LDAP server.
● When <Device Settings> is set
- The information set in
● When <Device Login Authentication Information> is set
- The authentication information used when logging into the machine is used.
● When <Registered Information for Each User> is set
- The authentication information of the LDAP server is registered for each user.
● <Device Login Authentication Information> is available only when using the same authentication
information for logging in to the machine and accessing the LDAP server, and when using a login
service which supports Integrated Authentication. For information whether the login service you are
using supports Integrated Authentication, contact your local authorized Canon dealer.
● When <Registered Information for Each User> is selected, each user sets the user name and
password used for LDAP authentication on the Send Basic Features screen
Information for Each User>
<Information Used for SMTP Server Authentication>
<Function Settings>
You can specify the authentication method for accessing an SMTP server.
● If you select <Device Settings>
- Uses the information that was set in <Authent./Encryption> (
Communication(P. 74) ).
● If you select <Register Info. for Each User>
- Registers and uses SMTP server authentication information for each user.
Settings/Registration
<Common> <Set Authentication Method>
Registering the LDAP Server(P. 57) is used.
<LDAP Server Authentication Information>.
<Common> <Set Authentication Method>
1089
<Register/Edit
Setting E-mail/I-Fax