Canon imageRUNNER ADVANCE C5560i III User Manual page 858

indxid
enablepartial
sub
faxprotocol
ecm
txstartspeed
commode
lineselect
uricommode
uriflag
pwdinputflag
Managing the Machine
A serial number allocated
to a destination
Setting for dividing data
when sending an e-mail
Subaddress of a file server
destination
Fax protocol
Indicates the use of ECM.
Starting transmission
speed for faxing
Fax communication mode
Setting regarding
international sending
Selected fax line
IP fax communication
mode
The flag for a URI used with
an IP fax
Setting for requesting
password input per
transmission
844
This attribute is required if the import
destination is a one-touch button Address
Yes Book. This number becomes the one-touch
button number. In other cases, enter a
number from 201 to 1,800.
No Enter either "on" or "off".
No
Enter one of the following.
No ● g3
● ecm
No Enter either "on" or "off".
Enter one of the following.
● 2400
● 4800
No ● 7200
● 9600
● 14400
● 33600
Enter one of the following.
● For PSTN domestic line: domestic
● For PSTN international line 1:
international1
No
● For PSTN international line 2:
international2
● For PSTN international line 3:
international3
Enter one of the following. Otherwise, "auto" is
used.
No
● For lines 1 to 4: line1, line2, line3, or line4
● For automatic line specification: auto
This is the chosen communication mode for IP
faxes. This attribute is required if you use IP
Yes
faxing, and are sending to a fax destination.
(Required for
Enter one of the following.
certain
● For G3: ip_g3
destination
types)
● For intranet: ip_lsv
● For a VoIP gateway: ip_gw
Yes
This attribute is required if the destination is
(Required for
an IP fax, and you use a URI instead of a fax
certain
number. Enter either "TRUE" or "FALSE". If you
destination
use a URI, enter "TRUE".
types)
No Enter either "on" or "off".