Canon imageRUNNER ADVANCE C5560i III User Manual page 1123

Specify the IP address or host name of the remote fax server machine.
<TX Timeout>
<Function Settings>
If the remote fax server machine does not respond for the time set for the TX Timeout, the remote fax job is
canceled.
<No. of TX Lines>
<Function Settings>
You can set the number of lines you can select when sending remote faxes. Set the number of lines to the same
number of telephone lines connected to the Remote Fax server machine.
<Select Priority Line>
<Function Settings>
You can specify the line to use when sending remote faxes.
<Use IP Fax>
<Function Settings>
You can select whether to use IP faxes.
<IP Fax Communication Mode Settings>
<Function Settings>
You can specify the communication mode to use when sending IP faxes.
<Use Remote Fax>
<Function Settings>
You can specify whether to use the machine as a server machine for the Remote Fax function.
● If you want to use the machine as a Remote Fax server machine, press <Network>
Port Settings> to <On>.
<Auto Adjust Communication Speed When Using VoIP>
<Function Settings>
You can send and receive faxes more accurately when the line or other party is prone to errors.
● If you set this to <On>, the communication speed is limited to <14400 bps> or slower in the following
settings, which reduces errors. If you set this to <Off>, the speeds return to their original values.
- <Sending Speed> for destinations registered in the Address Book or one-touch buttons
Registering Destinations in the Address Book(P. 223)
- The transmission speed set in <TX Start Speed>
Settings/Registration
<Send> <Fax Settings>
<Send> <Fax Settings>
<Send> <Fax Settings>
<Send> <Fax Settings>
<Send> <Fax Settings>
<Send> <Fax Settings>
<Send> <Fax Settings>
1109
<Remote Fax TX Settings>
<Remote Fax TX Settings>
<Remote Fax TX Settings>
<Remote Fax TX Settings>
<Remote Fax TX Settings>
<Remote Fax Settings>
<TX Start Speed>(P. 1108)
set <Dedicated