1
Press
<Adjustment/Maintenance>
Shading>
<Scanner Correction>.
2
Select the paper to use and press <OK>.
3
Press <Start Printing>.
➠
A test page is printed.
4
Place the test page on the platen glass.
●
Place the test page face down on the platen glass. Make sure the cyan bar is at the top edge of the glass.
5
Close the feeder and press <Start Scanning>.
➠
The test page is scanned.
6
Open the feeder and remove the test page.
Maintenance
<Adjust Image Quality>
1208
<Correct