●
If this is set to <On>, the <Time Until Direct Connection Session Is Terminated> setting is disabled.
●
If this is set to <On>, the machine will not enter the Sleep mode completely.
<IP Address Settings for Direct Connection>
<Preferences>
<Network>
Specify the IP address to distribute to mobile devices connecting using direct connection.
●
The IP address distributed to mobile devices may be up to nine numbers greater than the value of the
specified IP address.
<Personal SSID and Network Key Settings>
<Preferences>
<Network>
Specify an SSID and network key for each user when logging in and connecting using a direct connection. To set
an SSID, set <Specify SSID to Use> to <On>, and enter the SSID. To set a network key, set <Specify Network Key
to Use> to <On>, and enter the network key.
If <Automatically Enable/Disable Direct Connection at Login/Logout> is set to <On>, direct connections are
possible when logging in without pressing <Mobile Portal>
●
When specifying this setting as an administrator, select <Personal Settings> on the Settings/
Registration screen.
<Use Login Name as User Name for Print Jobs>
<Preferences>
<Network>
Specify whether to display the login name as the user name of print jobs that are printed using direct
connection.
<Use Bluetooth>
<Preferences>
<Network>
Specify whether to use a Bluetooth connection.
●
If you set this to <On>, <Compensate for Network Comm.> is enabled when <Low> is selected in
<Sleep Mode Energy Use>.
<Beacon Settings>
<Preferences>
<Network>
Settings/Registration
<Direct Connection Settings>
<Direct Connection Settings>
<Direct Connection>
<Direct Connection Settings>
<Bluetooth Settings>
<Bluetooth Settings>
1063
<Enable>.