When performing delayed sending or redial sending, the image data of the document to send was not
found in memory.
●
Scan the original again, and try sending again.
●
Select direct sending when sending again.
Could not send to multiple destinations because the machine had insufficient free memory.
●
Delete unnecessary documents and error documents to free up space.
●
Divide the document into two or more parts, and then try sending the document again.
●
Lower the resolution and try sending again.
◼
#040
When sending a fax from a remote fax client machine, sending could not be performed because the
memory of the remote fax server machine was insufficient.
●
Delete unnecessary documents and error documents from the remote fax server machine to free up
space.
●
Divide the document into two or more parts, and then try sending the document again.
●
Lower the resolution and try sending again.
The document could not be sent because the memory of the machine is full.
●
Delete unnecessary documents and documents with errors to make more memory available.
●
Divide the sending operation into multiple batches instead of sending the document to all destinations at
once.
●
Lower the resolution, and then send the document again.
◼
#054
The sending process was canceled because the unit telephone number and unit name were not
registered.
●
Try sending again after registering the unit telephone number and unit name.
<Send>(P. 1095)
<Register Unit Telephone Number>(P. 1107)
<Register Unit Name>(P. 1100)
◼
#080
A subaddress is not set in the device of the other party.
●
Check the subaddress of the other party, and try sending again.
◼
#081
A password is not set in the device of the other party.
●
Check the password of the other party, and try sending again.
◼
#082
Polling transmission is not configured in the device of the other party.
Troubleshooting
<Fax Settings>
<Set Line>
1312