Canon imageRUNNER ADVANCE C5560i III User Manual page 454

6
Press <OK>.
● This completes the registration.
7
Select the registered forwarding settings and press <Validate/Invalidate> to switch
the forwarding conditions to <On>.
● When a forwarding destination is deleted from the address book, <Validate/Invalidate> automatically
switches to <Off>. To resume forwarding with the same conditions, specify the destination again and
switch the forwarding conditions to <On>.
● You cannot specify a WebDAV server as an I-fax forwarding destination.
● If you specify a destination for which <Confirm Before Sending> is enabled as a forwarding
destination, the screen to enter the password does not appear. The registered password is used and
forwarding is performed.
● Documents with forwarding errors are handled according to the
Errors>(P. 1113) settings.
● You can store up to 1,000 forwarding settings.
● Selecting <Forward without Conditions> enables you to forward all received documents that do not meet the
specified conditions to the desired destination.
● You can forward to multiple destinations by specifying a group destination in <Forwarding Destination>.
However, if the specified destination is a group destination which contains a Mail Box, the document will not
be forwarded to that Mail Box.
● <Specify Fwd. Time> enables you to specify the time and day to perform forwarding.
● If you set <Forwarding Done Notice>, you can send a notification that forwarding was performed. You can
select <Notice Only for Errors>, so that you are not notified of a successful forwarding.
● If you set <Store/Print Received File> to <On>, you can store or print the received file by following the
Memory Lock settings. The received file is stored if Memory Lock is <On> and it is printed if Memory Lock is
<Off>.
Faxing
<Confirm Before Sending When Fax Dest. Included>(P. 1108)
440
<Handle Files with Forwarding