Canon imageRUNNER ADVANCE C5560i III User Manual page 887

of settings cannot be performed because network settings differ, and therefore data changed during
this period cannot be reflected. When changing to a new server machine, it is recommended that you
use the same network settings as the old server machine.
Changing the Scope of Sharing Data after Synchronization Has Been Started
● To change the scope of sharing data after synchronization has been started, stop synchronization on
all the client machines, change the scope of sharing, then start synchronization on all the client
machines again.
If the Data in a Specific Client Machine Differs from the Server Machine
● If the data is correctly synchronized in multiple client machines but not synchronized in a specific
client machine, follow the instructions displayed on the control panel.
Message(P. 1264)
● If the data in a specific client machine differs from the server machine but a message is not displayed,
delete the user settings information, and log in again. (
Information(P. 724) ) If the message <Synchronize Custom Settings: Log in again for
synchronization.> is displayed when logging in, log in again.
Check whether replication is executed periodically.
● The replicated data may not be sent due to a reason such as there being a problem in the network
connection with the replication destination, the power of the machine specified as the replication
destination being turned OFF, or the authentication information having been changed. Log in to the
Remote UI as an administrator, select [Synchronize Custom Settings (Server)]
[Replication]
- The following message is displayed if replication has been executed correctly.
[Waiting for replication... To change the [Destination Device for Replication], first perform [Stop
Replication], then change device. Last Replication : <yyyy/mm/dd hh:mm>]
- The following message is displayed if replication has not been executed correctly.
[Could not perform replication after <yyyy/mm/dd hh:mm> because an error occurred. Check the
settings for [Destination Device for Replication] and the status of the destination device.]
◼
If an error occurs when starting replication
The following messages are displayed if replication does not execute correctly when starting replication.
[The [Address] is incorrect.]
In this case, check whether the machine set as the replication destination is connected to the same network.
[The authentication information is incorrect.]
In this case, check whether the System Manager ID and password of the machine set as the replication
destination are set correctly.
[A device that cannot be used as the destination for replication is set. Select a different
device.]
In this case, check the network status of the machine set as the replication destination. A machine cannot be set
as the replication destination in the following cases.
● If the machine has started custom setting synchronization (server)
● If another server is set as the replication destination
● If the version of the machine is old
Managing the Machine
Starting Setting Synchronization(P. 867)
check the displayed message.
Deleting User Setting
873
Countermeasures for Each
[Server] click