Canon imageRUNNER ADVANCE C5560i III User Manual page 1093

● If you set <Text Priority> in this setting and your original is determined as black-and-white by the
<Auto (Color/B&W)> mode in <Select Color>, the original is processed as if you selected <Text> as the
original type setting, even if you select a mode other than <Text> for <Original Type> in <Copy>.
<Conversion Color by Specific Color for Two Colors Print>
<Function Settings>
You can select the specified color to use when printing using the two-color mode, which prints in black and a
specified color. The two-color mode can be set for copying or printing. This setting is reflected in both the two-
color mode for printing and the two-color mode for copying.
● All Chromatic Colors: When specifying the color to use for all chromatic colors other than black in the original
(or image data).
● Approximate Colors Only: When using the color for only the specified color (or approximate color) and using
black for all other chromatic colors in the original (or image data).
Example Replaced Colors and Settings
When the two-color mode is specified for an original (or image data) including the following colors, the colors
are replaced as indicated below.
● Colors included in the original (or image data): Red, orange, blue, black
● Red specified for the two-color mode
Original (or image data)
Red
Orange
Blue
Black
<2-Sided Printing>
<Function Settings>
You can specify the 2-Sided Printing for printing reports such as Send TX Report and Communication
Management Report.
<Register Form>
<Function Settings>
You can register image forms and superimpose them on output using the Superimpose Image function.
Settings/Registration
<Common> <Print Settings>
"All Chromatic Colors" "Approximate Colors Only"
Red
Red
Red
Black
<Common> <Print Settings>
<Common> <Print Settings>
1079
Red
Red
Black
Black
<Output Report Default Settings>