Canon imageRUNNER ADVANCE C5560i III User Manual page 1143

4
Press <OK>.
● You may have to set up the LDAP servers beforehand, depending on the network environment.
● Searching by organization/organizational unit may not be possible, depending on the information
registered in an LDAP server.
● You can add other search attributes.
<Register/Edit LDAP Search Attribute>
<Set Destination>
You can add search items to use when searching an LDAP server.
LDAP Search Attributes
1
Press .
2
Press <Set Destination>
3
Select <Not Registered 1> or <Not Registered 2>, and press <Register/Edit>.
● To edit a search attribute, select a registered attribute, and press <Register/Edit>.
● To delete a search attribute, press <Delete>.
4
Specify <Display Name> and <Attribute Name>, and press <OK>
● You cannot edit or delete names, <E-Mail>, <Fax>, <Organization> or <Organization Unit>.
<Settings for Search by Name When Using LDAP Server>
<Set Destination>
You can specify the attribute used when searching an LDAP server for destinations by name using "Search by
Name."
Configuring to "Search by Name" for LDAP Searches
1
Press .
2
Press <Set Destination>
3
Set <Name Type for Search Attribute> and <Filter>, and press <OK>.
<Acquire Address Book>
<Set Destination>
Settings/Registration
<Register/Edit LDAP Search Attribute>(P. 1129)
<Register/Edit LDAP Search Attribute>.
<Settings for Search by Name When Using LDAP Server>.
<Acquire Remote Address Book>
1129
<Close>.