Canon imageRUNNER ADVANCE C5560i III User Manual page 1102

Hide thumbs Also See for imageRUNNER ADVANCE C5560i III:

Table of Contents

- User Signatures

<256-bit AES Settings for Encrypted PDF>

When generating an encrypted PDF file, you can select <Acrobat 3.0 or Later/40-bit RC4>, <Acrobat 6.0 or Later/

128-bit RC4>, <Acrobat 7.0 or Later/128-bit AES>, or <Acrobat 10.0 or Equivalent/256-bit AES> as the PDF

encryption level. If you want to use <Acrobat 9.0 or Equivalent/256-bit AES> rather than <Acrobat 10.0 or

Equivalent/256-bit AES> as the encryption level, use this setting to change the selections you can make.

This setting is disabled when sending a fax or I-fax.

You can select the TL code or QR code for Document Scan Lock.

You can configure the settings for TL code.

If you convert a document with a TL code embedded to a generic file format (such as PDF and TIFF)

using the functions described in <Scan and Send> or <Scan and Store>, the embedded information is

not retained. Therefore, when you print the file after it has been converted, the settings in <Doc. Scan

Lock Operation Settings> are not reflected.

You can analyze the embedded information using the Document Scan Code Analyzer for MEAP that is

supplied with the Document Scan Lock Kit. For more information, see the manual for Document Scan

Code Analyzer for MEAP.

When <Scan Job Restriction> is set to <On>, the job is canceled if you scan an original with a TL code

embedded with <Prohibit All> information.

When <Restrict Functions Affecting Document Scan Lock> is set to <On>, the target function is grayed

out and cannot be used. When it is set to <Off>, the job is canceled if you copy/scan/print a document

with a TL code embedded when the target function is set.

You can configure the settings for QR code.

Settings/Registration

<Doc. Scan Lock Operation Settings>

<Doc. Scan Lock Operation Settings>

<Doc. Scan Lock Operation Settings>

Chapters

Table of Contents