Canon imageRUNNER ADVANCE C5560i III User Manual page 1117

Hide thumbs Also See for imageRUNNER ADVANCE C5560i III:
Table of Contents

Advertisement

If logging in using User Authentication, the login name appears in <100> of the Sender Name (TTI)
list. If <On> is selected, the login name in <100> is automatically set as the <Sender Name (TTI)> in
<Options>.
If you enter an e-mail address as the reply-to destination in <Options> when sending an e-mail
message or I-fax document, that e-mail address is given priority, even if <Specify Authentication User
for Reply-To> is set to <On>.
<Specify Authentication User as Sender>
<Function Settings>
You can select whether to display the e-mail address of a user who logs in to the machine with personal
authentication management in the From field as the sender of received e-mail.
If this mode is set to <Off>, users that are logged in as guests using a login service such as User
Authentication can still perform sending, even if <Allow Unregistered Users to Send E-Mail> is set to
<Off>.
<Allow Unregistered Users to Send E-Mail>
<Function Settings>
When the machine is in use with personal authentication management, you can select whether to allow the
sending of an e-mail from a user whose e-mail address is not registered in the machine. If <Off> is selected,
users with their e-mail addresses registered can only send e-mails.
If you set <Specify Authentication User as Sender> to <Off>, the address registered in the Device
Information settings is displayed at the receiving end.
<Full Mode TX Timeout>
<Function Settings>
You can set the time before sending operations automatically terminate if an MDN (notification e-mail
confirming the transmission result) is not received from the recipient when sending an I-fax in the <Full> mode.
<Print MDN/DSN upon Receipt>
<Function Settings>
In I-fax Full Mode, e-mail messages are sent to the machine from the recipient and the mail server, notifying
you whether I-faxes are sent to destinations successfully or not. You can select whether to print these
notification e-mails when the machine receives them.
I-fax delivery can also be confirmed in the TX Report.
Settings/Registration
<Send>
<E-Mail/I-Fax Settings>
<Send>
<E-Mail/I-Fax Settings>
<Send>
<E-Mail/I-Fax Settings>
<Send>
<E-Mail/I-Fax Settings>
1103
TX Report(P. 1231)

Advertisement

Table of Contents
loading

Table of Contents