Canon imageRUNNER ADVANCE C5560i III User Manual page 1337

◼
#815
You cannot log on to the file server because the machine is printing a document sent to that server.
Simultaneous connections are not possible.
● Wait for a few moments before trying to send the data again. Alternatively, stop the PServer.
◼
#816
Printing could not be performed because the maximum number of prints set in Department ID
Management was exceeded.
● Contact your System Manager.
◼
#818
The received data was in a file format that cannot be printed.
● Tell the other party to change the file format and send again.
◼
#819
Data that cannot be handled was received. The MIME information is invalid.
● Tell the other party to check the settings and send again.
◼
#820
Data that cannot be handled was received. The BASE64 or uuencode is invalid.
● Tell the other party to check the settings and send again.
◼
#821
Data that cannot be handled was received. A TIFF analysis error occurred.
● Tell the other party to check the settings and send again.
◼
#822
Data that cannot be handled was received. The image cannot be decoded.
● Tell the other party to check the settings and send again.
◼
#825
The Department ID and PIN of a job being executed or a reserved job were deleted, or the PIN was
changed.
● Execute the job again using the changed Department ID and PIN.
Device information could not be delivered because the System Manager is registered on the destination
client machine but not on the host machine. Or device information could not be delivered because the
System Manager ID and System Manager PIN registered in the client machine differ from the System
Manager ID and System Manager PIN registered in the host machine.
Troubleshooting
1323