Canon imageRUNNER ADVANCE C5560i III User Manual page 702

[Import Method:]
Select whether to import only updated or added user data, or all user data.
● If you select [Perform full import] and a user with the same user name is already registered, the user
information is overwritten.
● When importing information of a user who accesses the Advanced Box with SMB, specify the appropriate
value in the "password" column. If you export the data from the machine and import it to the other
machine without performing the above operation, authentication may fail. (The value is "********" when
exported.)
● When performing a complete import, any users not listed in the imported files are deleted from the
machine. However, "-----" and "Administrator", which are registered by default, will remain even if they are
not listed in the imported files.
● "User Authentication Format" is the only file format that is supported. Also, the "uid" column is required.
● Note that if you are using a server that does not support SMBv3.0 encrypted communication, user data
travels unencrypted across communication paths while it is being obtained.
6
Click [Connection Test], confirm that you can connect, and then click [Update].
Manually Importing User Data
You can manually specify data for importing and update user information.
1
Start the Remote UI.
2
Click [Settings/Registration] on the portal page.
3
Click [User Management]
4
Click [Import]
5
Specify the required settings.
Managing the Machine
Starting the Remote UI(P. 784)
[Authentication Management].
[Manual Import Settings...]
Remote UI Screen(P. 785)
688