Canon imageRUNNER ADVANCE C5560i III User Manual page 883

● The client machine cannot connect via search in the following cases. Enter the IPv4 address for the
destination server address.
- If the network settings of the server machine include both IPv4 and IPv6, IPv6 is prioritized, and
IPv6 is disabled on the client device
- If the main line is used for the network settings of the server machine and the sub line is used for
the network settings of the client machine
● If the sub line is used for the network settings of the server machine, specify the following settings.
- Server and client machine: Enter the IP address of the main line or localhost as the address of the
destination server.
- Client machine: Enter the IP address of the sub line of the server machine as the address of the
destination server.
6
Click [Change].
7
Restart the machine.
● This operation is not required for a server machine or server/client machine.
● If the machine is a server machine or server/client machine, continue to specify the detailed synchronization
settings. Specifying Detailed Synchronization Settings (Server Machine or Server/Client Machine)
(P. 870)
Checking the Communication Log for Synchronization
● You can check the communication log from the screen for synchronizing custom settings. The log can
also be downloaded as a file.
● "Warning" is recorded as the level when the server machine cannot communicate temporarily.
● "Error" is recorded as the level when the maximum amount of data that can be registered has been
exceeded or authentication with the server machine fails.
Simple Synchronization Settings
● Synchronization of custom settings can be started from the control panel for Canon multifunction
printers within the same router.
- For the server machine:
Press <Management Settings>
(Server)> to <Enable>.
- For a client machine:
Press <Management Settings>
(Client)> to <Enable>.
● If the machine is used as a server/client machine, also set <Synchronize Custom Settings (Client)> to
<Enable>.
● User Authentication must be enabled as the authentication method.
Note When Canceling Synchronization
● When a client machine cancels synchronization of custom settings, the client machine will become
unable to retrieve the settings for each user registered in the server machine. Therefore note that the
personalized data of a machine that was a client machine may not have the latest data after
synchronization of custom settings has been canceled.
Managing the Machine
Turning OFF/Restarting the Machine(P. 793)
<Device Management>
<Device Management>
869
set <Synchronize Custom Settings
set <Synchronize Custom Settings