Cleaning The Feeder - Canon imageRUNNER ADVANCE C5560i III User Manual

Cleaning the Feeder

If any of the following problems occurs when the document is scanned from the feeder, then perform feeder
cleaning.
● The document cannot be scanned clearly
● The size of the document cannot be detected correctly
● The document gets dirty during scanning
● Paper jam occurs frequently
1
Turn the power OFF, and remove the power plug from the power outlet.
Turning OFF the Machine(P. 107)
● Check the operation status of the machine before turning the power OFF. You can turn the power OFF
even if the machine is executing an operation, but this may cause the operation to be interrupted or data
to become damaged.
2
Pull the lever, and open the feeder cover.
3
Clean the rollers inside the feeder cover.
● Wet a soft cloth with water and wring it out well, then wipe the rollers with it. Afterwards, wipe the rollers
with a soft and dry cloth.
Maintenance
1159
4XR3-0L6