<Include Password When Exporting Address Book>
<Set Destination>
If you set this setting to <On>, you can select whether to include the passwords registered for destinations
when exporting the Address Book using the Remote UI.
●
You can set whether to export the following passwords:
- The password for subaddress transmission set in fax destinations
- The authentication password set for file server destinations (including the Advanced Box that is
opened externally)
<Register LDAP Server>
<Set Destination>
You can specify the settings of an LDAP server, such as a server name and server address, you are using when
searching for or registering destinations.
<Auto Search When Using LDAP Server>
<Set Destination>
If you set this setting to <On>, you can immediately start searches when accessing an LDAP server from the
control panel of the machine.
●
Automatic searches are only performed for the first LDAP server registered, which is displayed on the
top of the LDAP server drop-down list.
<Confirm TLS Certificate for LDAP Server Access>
<Set Destination>
You can select whether to verify TLS certificates when connected to an LDAP server.
<Change Default LDAP Search Conditions>
<Set Destination>
You can register frequently used search conditions as the default settings for searching an LDAP server.
Registering the Default Search Conditions for Each LDAP Server
1
Press
.
2
Press <Set Destination>
●
To restore the default search conditions, press <Initialize>.
3
Configure the search conditions.
Settings/Registration
Registering the LDAP Server(P. 57)
<Change Default LDAP Search Conditions>
1128
<Register>.