Canon imageRUNNER ADVANCE C5560i III User Manual page 1327

● Tell the other party to configure polling transmission, and perform polling reception again.
◼
#083
The subaddress and password of the machine and the device of the other party did not match when
performing polling reception.
● Check that the subaddress and password of the machine and the device of the other party match, and try
sending again.
◼
#084
Cannot perform polling reception because the password is not supported by the device of the other
party.
● Perform polling reception without using a password.
◼
#099
The operation was canceled before it was complete.
● Perform the operation again.
◼
#102
The subaddress and password do not match.
● Check the subaddress and password of the other party, and try sending again.
There was insufficient memory in the recipient's machine.
● Ask the recipient to make more memory available.
◼
#107
The document could not be sent because there was insufficient memory available.
● Lower the resolution or divide the document into two or more parts, and then try sending the document
again.
● Delete unnecessary files to make more memory available.
Saving Received Documents in the Machine (Memory Reception)(P. 433)
● If this problem occurs frequently, contact your local authorized Canon dealer.
◼
#401
The memory media or file server is full, or the number of files that can be saved in the root directory (the
top level folder inside the memory media) has been exceeded.
● Delete unnecessary files from the memory media or file server, or create a new folder and move existing
files to that folder to create room in the root directory.
Troubleshooting
1313