Canon imageRUNNER ADVANCE C5560i III User Manual page 826

Enter the organization name.
[Common Name:]
Enter the IP address or FQDN.
● When performing IPPS printing in a Windows environment, make sure to enter the IP address of the
machine.
● A DNS server is required to enter the FQDN of the machine.Enter the IP address of the machine if a DNS
server is not used.
[Challenge Password:]
When a password is set on the SCEP server side, enter the challenge password included in the request
data (PKCS#9) for requesting a certificate to be issued.
[Key Use Location:]
Select the destination where the key will be used. When [IPSec] is selected, select the IPSec of the
destination from the drop-down list.
● When selecting something other than [None], enable the various functions in advance. If a certificate is
successfully obtained with the various functions disabled, the certificate is assigned as the destination,
but the various functions are not automatically enabled.
6
Click [Send Request].
7
Click [Restart].
● A manual request for issuing a certificate cannot be sent when [Enable Timer for Certificate Issuance
Auto Request] is selected.
● The information set here is not saved to the storage of the machine.
Requesting a Certificate to Be Issued at the Specified Time
You can set to automatically request a certificate to be issued at a specified time.
1
Start the Remote UI.
2
Click [Settings/Registration] on the portal page.
3
Click [Device Management]
4
Click [Settings for Certificate Issuance Auto Request].
5
Set the items required for requesting a certificate to be issued.
Managing the Machine
Requesting a Certificate to Be Issued at the Specified Time(P. 812)
Starting the Remote UI(P. 784)
[Settings for Certificate Issuance Request (SCEP)].
812
Remote UI Screen(P. 785)