<2 on 1 Log>
<Function Settings>
If this setting is set to <On>, you can print received documents with the 2 on 1 layout.
●
This mode is only available under the following conditions:
- You must select the same paper drawer for printing two consecutive pages of a received document.
- The paper in the selected paper drawer must be large enough for two consecutive pages to be
printed out.
●
If you set <2 on 1 Log> to <On>, documents are printed with a dotted line in the middle. If you print
the document with sender information, the dotted line is not printed in the area where the sender
information is located.
<Print RX Page Footer>
<Function Settings>
You can select whether to print information, such as reception time and page number, at the bottom of
received documents.
●
When an e-mail without a body is received, the From information and Subject information (up to 24
characters for each) is printed at the top of the first page of the attachment file.
<YCbCr RX Gamma Value>
<Function Settings>
You can print received I-fax documents in the appropriate quality.
●
This setting is disabled when receiving faxes.
<Interrupt and Print RX Jobs>
<Function Settings>
You can set to suspend other jobs to print faxes/I-faxes when the machine receives them.
<Use Forwarding Settings>
<Function Settings>
You can select whether to forward received documents to other destinations such as the Confidential Fax Inbox
of the machine and an external file server. If you select <On>, specify the forwarding conditions in <Forwarding
Settings>.
Settings/Registration
<Receive/Forward>
<Common Settings>
<Receive/Forward>
<Common Settings>
<Receive/Forward>
<Common Settings>
<Receive/Forward>
<Common Settings>
<Receive/Forward>
<Common Settings>
1112