Canon imageRUNNER ADVANCE C5560i III User Manual page 837

● When generating an Advanced Box operation log, click [Function Settings]
[Advanced Box Settings]
[Apply Setting Changes].
● If the power of the machine is turned OFF while collecting logs due to a power outage, etc., collection starts
again when the machine restarts, from the log that was being collected before the power turned OFF.
● If you stop log collection while logs are being collected, the logs for the period that log collection was
stopped are not collected when log collection is next started.
Exporting Logs Automatically
You can set the machine to automatically export audit logs to a specified folder at a predetermined time each day, or
when the number of audit logs reaches 95% of the maximum number (approximately 38,000).
1
Start the Remote UI.
2
Click [Settings/Registration] on the portal page.
3
Click [Device Management]
Audit Logs].
4
Select the check box for [Use Auto Export] and specify the required settings.
[User Name:] / [Password:]
Enter the user name and password necessary for logging into a server to which logs are exported.
[SMB Server Name:]
Enter the host name of the SMB server to export log files to, along with the path that requires
authentication.
● \\Host Name
● \\IP Address\Shared Folder Name
[Destination Folder Path:]
Enter the path for the folder in which to store the log files.
[Perform At:]
You can specify the time at which to perform exporting.
5
Click [Check Connection], confirm that you can connect, and then click [Update].
Managing the Machine
[Set Details] select the check box for [Save Operation Log]
Starting the Remote UI(P. 784)
[Export/Clear Audit Log]
823
[Store/Access Files]
Remote UI Screen(P. 785)
[Settings for Auto Export
click [OK]