Table of Contents
Advertisement
Message Is Displayed
This section describes some of the messages.
If a message is displayed on the printer's touch screen, see below.
Message Is Displayed on Printer's Touch Screen
If a message is displayed on the computer, see below.
Error Regarding Automatic 2-sided Printing Is Displayed
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
Writing Error/Output Error/Communication Error (Windows)
Other Error Messages (Windows)
Message Is Displayed on Printer's Touch Screen
Check the message and take appropriate action.
•
• Power was not turned off correctly the last time. Press the
The printer may have been unplugged while the power was still on.
Select OK on the printer's touch screen to cancel the error.
Refer to
Turning the Printer On and Off
• Cannot connect to the server. Please wait a while and try again.
•
The printer cannot connect to the server due to a communication error.
Select OK on the printer's touch screen to cancel the error and try again after a while.
Error Regarding Automatic 2-sided Printing Is Displayed
See Automatic 2-sided Printing Problems and take the appropriate action.
Check
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
The printer may have been unplugged while it was on.
Check the error message displayed on the computer and click OK.
The printer starts printing.
Refer to
Turning the Printer On and Off
Writing Error/Output Error/Communication Error (Windows)
If the ON lamp is off, make sure printer is plugged in and turn on.
Check 1
The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit.
Make sure printer is properly connected to computer.
Check 2
for the correct way to turn the power off.
for the correct way to turn the power off.
425
button when turning power off.
Advertisement
Table of Contents
