Densitometer Correction; Visual Correction - Canon imagePRESS C7000VP Reference Manual

Densitometer Correction

1
➞ [Adjustment/Cleaning] ➞ [Shading Correction].
Press
2
Press [Densitometer Correction].
3
Press [Test Print].
IMPORTANT
Only 330.2 mm x 482.6 mm, 320 mm x 450 mm (SRA3), 304.8 mm x
457.2 mm, 11" x 17", A3, A4, or LTR plain paper can be used for test prints.
Make sure that a sufficient supply of paper is loaded into the machine
before starting this procedure.
4
Gauge the mark on the output test print using the
densitometer.
5
Press [Fine Adjust] of the colour you want to adjust.
6
Select the number ➞ enter the gauged density value of the
mark of the same number on the test print ➞ press [OK].
NOTE
The colour patterns on the test print are laid out in numeric order (1 to 7)
when the cyan patterns are on top.
7
Press [Store and Finish].
NOTE
If [Test Print] is pressed before pressing [Store and Finish], a test print with
colour patterns after adjustment is output.

Visual Correction

1
➞ [Adjustment/Cleaning] ➞ [Shading Correction].
Press
2
Press [Visual Correction].
3
Press [Test Print].
4
Press [Test Print].
Test print is output.
Adjusting the Machine A4-65