Canon imageRUNNER ADVANCE C5560i III User Manual page 1116

● If you do not verify the certificate, TLS communication is performed, even with an invalid certificate.
● If there is a problem with the certificate, SMTP sending will fail.
<Confirm TLS Certificate for POP RX>
<Function Settings>
You can check whether the TLS server certificate is valid when receiving with POP. You can verify the validity of
the certificate and reliability of the certificate chain, as well as confirm the CN (Common Name).
● If you do not verify the certificate, TLS communication is performed, even with an invalid certificate.
● If there is a problem with the certificate, POP receiving will fail.
<Maximum Data Size for Sending>
<Function Settings>
You can set the maximum data size for outgoing e-mail messages and I-fax documents. If an e-mail message
exceeds this data size limit, it is split up into several e-mail messages before being sent. However, if an I-fax
transmission exceeds the data size limit, it is handled as an error, and not sent.
● If you enter '0' MB as the data size, there is no size limit on the data that is sent.
● Set the maximum data size for sending lower than the data limit for the mail server.
<Default Subject>
<Function Settings>
You can set the subject to specify automatically if you do not enter a subject when sending an e-mail/I-fax.
<Specify Authentication User for Reply-To>
<Function Settings>
You can select whether to set the e-mail address of a user who logs in to the machine with personal
authentication management as the reply-to address when sending an e-mail/I-fax.
Settings/Registration
<Send> <E-Mail/I-Fax Settings>
<Send> <E-Mail/I-Fax Settings>
<Send> <E-Mail/I-Fax Settings>
<Send> <E-Mail/I-Fax Settings>
1102