<External Interface>
This section describes the USB settings.
<Use as USB Device>
<Preferences>
You can set whether to use the machine as a USB device.
●
If this is set to <Off>, print and scan jobs from a computer connected via USB cable cannot be
performed.
●
Changes in settings are effective after performing <Apply Setting Changes> on the Top screen of the
Settings/Registration.
<Use MEAP Driver for USB Input Device>
<Preferences>
You can set whether to use the MEAP driver for USB input device connections.
●
Depending on the type of MEAP application that uses device such as a keyboard or card reader, you
may need to set this to <On>. To check whether you need to set this to <On>, see the manual for the
MEAP application you are using, or contact your local authorized Canon dealer.
●
Changes in settings are effective after performing <Apply Setting Changes> on the Top screen of the
Settings/Registration.
<Use MEAP Driver for USB Storage Device>
<Preferences>
You can set whether to use the MEAP driver for USB external storage.
●
Depending on the type of MEAP application that uses USB external memory device, you may need to
set this to <On>. To check whether you need to set this to <On>, see the manual for the MEAP
application you are using, or contact your local authorized Canon dealer.
Settings/Registration
<External Interface>
<USB Settings>
<External Interface>
<USB Settings>
<External Interface>
<USB Settings>
1066
4XR3-0K4