Cleaning The Platen Glass - Canon imageRUNNER ADVANCE C5560i III User Manual

Cleaning the Platen Glass

If the platen glass is dirty, originals may not be scanned clearly, or the size of the original may not be detected clearly.
1
Turn the power OFF, and remove the power plug from the power outlet.
Turning OFF the Machine(P. 107)
● Check the operation status of the machine before turning the power OFF. You can turn the power OFF
even if the machine is executing an operation, but this may cause the operation to be interrupted or data
to become damaged.
2
Open the feeder.
3
Wipe the reverse side of the feeder and the platen glass.
Wipe the platen glass.
● Wipe the platen glass with the included cleaning cloth.
● If the cleaning sheet is dirty, rinse it in water and dry it before using it.
Wipe the reverse side of the feeder.
● If you cannot remove the dirt, wet a soft cloth with water and wring it out well, then wipe the
reverse side of the feeder with it. Afterwards, wipe the reverse side of the feeder with a soft
Maintenance
1157
4XR3-0L5