●
[Changes] for Advanced Box backs up only the data updated or added since all the stored data was backed
up. [Changes] always backs up data based on differences from [All] as opposed to the last [Changes]
backup.
●
After performing backup, you can click [Back Up/Restore Log] on the screen displayed in step 7, and check
the results of the backup in [Result].
●
If the [A server error has occurred.] message is displayed, the network settings may not be configured
properly. Check the network settings.
●
The backed-up data can be restored not only to the machine but also to upgrades of the same model.
Restoring Backup Data
1
Start the Remote UI.
2
Click [Settings/Registration] on the portal page.
3
Click [Data Management]
4
Click [Display Backup Data].
5
Select the backup data to restore, and click [Execute]
●
Enter the password if one was set when backing up the data.
6
Click [Restart Main Unit].
●
After the machine restarts, the backup data is restored.
●
The backup data may not be fully restored when certain machine settings are used.
Restoring saved data
●
Restoration is performed after all of the data stored in the machine, or documents that are being sent,
received, or stored, are erased.
●
If authentication management is performed for Advanced Box users (
Public(P. 79) ), you need to pay particular attention when restoring the backed up data to a different model.
For more information, see.
●
After you restore backup data, the machine may print documents automatically.
Managing the Machine
Starting the Remote UI(P. 784)
[Restore].
Manually Importing User Data(P. 688)
850
Remote UI Screen(P. 785)
[OK].
Setting Advanced Box to