Canon imageRUNNER ADVANCE C5560i III User Manual page 532

multiple destinations specified that are being sent/saved, or when entering a new destination is restricted
( Restricting New Destinations(P. 757) ).
Checking If Documents Are Sent or Saved Successfully
1
Press .
2
Press <Send>
3
Check if documents are sent or saved successfully.
● <OK> is displayed in the <Result> column when a document was sent or saved successfully. If <NG> is
displayed, this shows that a document failed to be sent or saved because it was canceled or there was some
error.
● Selecting a job and pressing <Details> enables you to check detailed information about the job. A three-digit
number in the <Error Code> column on the information represents an error code. You can check the causes
and solutions for errors based on error codes.
● By pressing <Communic. Mgt. Report>, the displayed send/save log can be printed as a list.
TIPS
Registering an address from the send history
● You can register an address to the Address Book or a one-touch button via the send history on the <Status
Monitor> screen. This saves you the effort of directly entering the address, and also helps avoid sending to
an incorrect destination due to entering the wrong address.
Book(P. 223) Registering a Destination in a One-Touch Button(P. 239)
LINKS
Sending/Saving at a Specified Time(P. 541)
Printing a List of Usage History(P. 1227)
Outputting a Communication Result Report(P. 1229)
Scanning
<Job Log>.
Countermeasures for Each Error Code(P. 1308)
Registering Destinations in the Address
518