◼
#866
The job was canceled by the security related settings.
●
If you are executing a job from the printer driver, use the user information of the appropriate privileges.
●
If you are executing a job from the control panel, login as a user with the appropriate privileges.
The security related settings are as follows.
●
<Restrict Job from Remote Device without User Auth.> is <On>
●
<Prohibit Authentication Using Department ID and PIN> is <On>
●
<Use ACCESS MANAGEMENT SYSTEM> is <On>
- <Print from Drivers without AMS Printer Driver Add-in> is <Restrict>
- The print function is restricted by the user role settings
*For information on the user roll settings, see the ACCESS MANAGEMENT SYSTEM Administrator Guide.
◼
#868
When sending with WebDAV, communication with the destination failed, and access via a proxy was
requested (received HTTP Error 305: Use Proxy).
●
Check the WebDAV server settings.
●
Check the proxy settings.
Setting a Proxy(P. 737)
◼
#869
When sending with WebDAV, a response indicating that authentication failed was received from the
destination (received HTTP Error 401: Unauthorized).
●
Check the user name or password.
●
Check the WebDAV server security settings.
◼
#870
When sending with WebDAV, a response indicating that the request was rejected was received from the
destination (received HTTP Error 403: Forbidden).
●
Try sending again after waiting a while.
●
Check the destination settings.
●
Check the WebDAV server settings.
◼
#871
When sending with WebDAV, a response indicating that the specified folder was not found was received
from the destination (HTTP Error 404: Not Found/409: Conflict/410: Gone).
●
Check the destination settings.
Troubleshooting
*
1330