<Hold>
This section describes the Job Hold settings.
<Use Hold Function>
<Function Settings>
You can set whether to use the Job Hold function.
<Time Until Hold Job Auto Delete>
<Function Settings>
You can set the time that has to elapse before hold jobs are automatically deleted.
●
Held jobs are automatically deleted after a certain period of time or if the job ticket is edited or a job
operation is performed.
<Store PS/PDF Data to Hold>
<Function Settings>
You can set to store PS/PDF data jobs, which are executed with LPR protocol, in the Hold Queue.
<Default Settings for Job Deletion After Printing>
<Function Settings>
You can set the default setting for <Delete After Printing> on the Hold screen.
Settings/Registration
<Hold>
<Hold>
<Hold>
<Hold>
1126
4XR3-0KR