<Common>
This section describes settings for functions such as Paper Feed Settings, Paper Output Settings, Print Settings, Scan
Settings, and Generate File.
●
Some of the settings may not be displayed depending on the configuration of optional equipment installed
on the machine.
<Paper Drawer Auto Selection On/Off>
<Function Settings>
You can configure the paper source that will be used when copying/printing with <Select Paper> set to <Auto>.
This setting also functions when the paper in the current paper source runs out during copying/printing.
Automatically Selecting the Appropriate Paper Source for a Specific Function (P. 182)
<Paper Source Auto Selection Based on Color>
<Function Settings>
The paper source to use is automatically set according to the setting in <Select Color> when copying. If the
original was scanned with <Auto (Color/B&W)> set, the color mode selected for scanning is used.
●
A setting other than <Black & White> is set for <Color>.
●
This setting is only valid for copying.
●
This setting is only valid when <Consider Color> in <Paper Drawer Auto Selection On/Off> is set to
<On>.
●
In the following cases, the paper source set in <Color> is automatically selected, regardless of the
color mode specified when copying.
- When the Merge Job Blocks mode is set
- When the Different Size Originals mode and Job Build mode are set together
<Switch Feed Method>
<Function Settings>
When regularly using paper with logos such as letterheads, while printing in both one-sided and two-sided, you
can set this setting to <Print Side Priority> to print the first page on the front side for both one-sided and two-
sided, without having to change the paper orientation.
●
The settings for Automatic Paper Selection and Auto Drawer Switching are disabled for paper sources
with <Print Side Priority> set. The print speed is also slower when performing one-sided printing.
Settings/Registration
<Common>
<Paper Feed Settings>
<Common>
<Paper Feed Settings>
<Common>
<Paper Feed Settings>
1076
Loading Preprinted Paper(P. 132)
4XR3-0Y8