Canon imageRUNNER ADVANCE C5560i III User Manual page 758

3
Set <Use IPSec> to <On>, and press <Register>.
4
Specify a name for the policy.
● Press <Policy Name>, enter the name, and press <OK>.
● Canon multifunction printers support two key lengths for the AES encryption method: 128 bit and 256 bit. To
restrict the key length to 256 bit and meet CC authentication standards, set <Only Allow 256-bit for AES Key
Length> to <On>.
5
Configure the IPSec application parameters.
1
Press <Selector Settings>.
2
Specify the IP address to apply the IPSec policy to.
● Specify the IP address of this machine in <Local Address>, and specify the IP address of the
communication peer in <Remote Address>.
<All IP Addresses>
<IPv4 Address>
<IPv6 Address>
Managing the Machine
IPSec is applied to all sent and received IP packets.
IPSec is applied to IP packets sent to and received from the IPv4 address of this
machine.
IPSec is applied to IP packets sent to and received from the IPv6 address of this
machine.
744