Canon imageRUNNER ADVANCE C5560i III User Manual page 1107

Hide thumbs Also See for imageRUNNER ADVANCE C5560i III:

Table of Contents

This section describes the printer settings.

You can print reports for the machine settings.

Specify the printer settings.

For more information, see Setting the Machine (PS/PCL/UFR II Printer).

If this setting is set to <On>, you can restrict jobs from the printer driver.

Select default Page Description Language (PDL).

You can set whether to prioritize the printer driver settings or the paper settings in the machine when printing a

job with the multi-purpose tray specified as the paper source. In addition, if you prioritized the settings in the

machine, set the paper feed mode for when free size paper is set in the multi-purpose tray.

When the following conditions are met, you can press <Temp. Change Ppr. in MP Tray> on the paper

selection screen of <Copy> and <Access Stored Files> to change the paper size/type to load from the

multi-purpose tray:

- If paper is loaded in the multi-purpose tray

- If this setting is set to <On>

<Multi-Purpose Tray Defaults>(P. 1042) is set to <Use Preset>

If the paper size specified in the printer driver greatly differs from the paper size set in the multi-

purpose tray, an error message is displayed.

Take note of the following when free size paper is set for <Mode A (Prioritize Printer Driver Settings)>.

- When printing on envelopes, be sure to specify the paper type on the printer driver. If it is not

specified, printing may not be performed.

- A paper jam or another printing problem may occur if the paper type is not specified when printing

on other type of paper.

Settings/Registration

Chapters

Table of Contents