Canon imageRUNNER ADVANCE C5560i III User Manual page 1106

- Specify an output tray that supports the Offset mode in the output tray settings.
Settings>(P. 1077)
- Manually disable <Collate> before executing the job.
<Auto Recognize Original Orientation>
<Function Settings>
When this setting is set to <On>, the image to copy is automatically rotated 90 degrees according to the
orientation of the paper if the orientation of the original differs from the orientation of the paper that is loaded
in the machine.
● If you are enlarging A4, B5, or A5 originals are enlarged onto A3 or B4 copy paper, Auto Orientation is
not performed even if you select <On>.
● Only the images of standard size originals up to A4 size can be rotated when the copy ratio is set to
100%.
<Select Color Settings for Copy>
<Function Settings>
You can restrict the use of the color mode in <Select Color> when copying.
<Speed Priority for Copying from Feeder>
<Function Settings>
You can give a priority to speed over accuracy when copying from feeder.
<Job Separator Between Groups>
<Function Settings>
When copying two copies or more with <Group (Same Pages)> in <Finishing>, you can insert sheets between
each page group. If you select <On>, select a paper source.
Settings/Registration
<Copy>
<Copy>
<Copy>
<Copy>
1092
<Output Tray