Canon imageRUNNER ADVANCE C5560i III User Manual page 1284

● Check the IP address, DHCP, and Auto IP settings in <TCP/IP Settings>.
Setting an IPv4 Address(P. 37)
● If you selected <Wired LAN + Wireless LAN> or <Wired LAN + Wired LAN> in <Select Interface>, check the
settings for the IP address and DHCP in <Sub Line Settings>.
<IP Address Settings>(P. 1052) (<Sub Line Settings>)
Check the TCP/IP. (Main Line)
The IP address of the main line is set to "0.0.0.0".
● Set a different IP address.
Setting an IPv4 Address(P. 37)
Check the TCP/IP. (Sub Line)
The IP address of the sub line is set to "0.0.0.0".
● Set a different IP address.
Setting the IPv4 Address of the Sub Line(P. 42)
Check the wired LAN adapter connected to the USB port.
Multiple USB-LAN adapters are connected, or the USB-LAN adapter is not connected/recognized.
● Check the connection of the USB-LAN adapter.
Connecting to a Wired LAN for the Sub Line(P. 27)
● If you reconnected the USB-LAN adapter, restart the machine.
Front Side(P. 92)
XPS Print Range Error
There are no pages that can be processed in the specified range for printing.
● Specify a correct page range.
XPS Image Data Error
Failed to extend the image data.
● Replace the image data in the XPS file and try printing again.
XPS Spool Memory Full
There is insufficient memory to process the XPS data.
● Restart the machine and try printing again. If you still cannot print, divide the pages into multiple files and
print them separately.
XPS Data Error
An invalid command is specified due to corrupt data, etc. and processing cannot continue.
● Perform printing again using XPS data in a format supported by the machine.
Troubleshooting
1270