Canon imageRUNNER ADVANCE C5560i III User Manual page 1301

Could not retrieve the device information details. Do you want to register the device as
a destination?
Could not connect with the client machine due to an unknown reason when registering the destination
client machine for distributing device information.
● Check whether the client machine is turned ON.
● Check the client machine and network settings, and try connecting again.
Setting up the Network Environment(P. 21)
● Set the key and certificate to use for TLS in the client machine.
Configuring the Key and Certificate for TLS(P. 739)
● Set a setting in <Restrict Receiving for Each Function> to <Off> in the client machine.
<Device Information Distribution Settings>(P. 1135)
● Set <Use HTTP> to <On> in the client machine.
<Network>(P. 1052)
● If you select <Yes> in the above message, the client machine will be registered with <Distributable
Settings> blank in <Details>, but device information cannot be distributed.
Replace the toner cartridge. (XXXX)
The toner in the toner cartridge has run out.
● Pressing the icon displayed at the bottom right of the screen displays a motion video to give the
instructions for toner cartridge replacement. Follow these instructions to replace the toner cartridge.
Procedure for Replacing the Toner Cartridge(P. 1165)
● The "XXXX" in the message indicates the toner color.
● When black toner has run out completely, it is not necessary to press the icon on the lower-right
corner of the screen. The toner cartridge replacement screen is automatically displayed, which allows
you to perform the replacement procedure in accordance with the instructions given by motion video.
Cannot recognize the toner cartridge. Pull out the toner cartridge, then insert it again
or information about remaining toner won't be detected properly.
The toner cartridge may not be correctly inserted, the toner cartridge may have been damaged, or a
toner cartridge with the wrong model number may be inserted.
Troubleshooting
<TCP/IP Settings>
1287