Erasing Dark Borders When Scanning (Erase Frame) - Canon imageRUNNER ADVANCE C5560i III User Manual

Erase FrameErase Frame

Erasing Dark Borders When Scanning (Erase Frame)

● Place the original with punch holes on the platen glass. Placing in the feeder may result in damage.
1
Place the original.
2
Press <Scan and Send>.
3
Specify the destination on the Scan Basic Features screen.
Screen(P. 497)
4
Press <Options>
5
Specify the erasing type and width.
Erasing the frames in copies of documents
1
Press <Erase Original Frame> and check <Original Size>.
● If the size displayed in <Original Size> is different from the size of the original, press <Change> to
select the size. Only the original sizes shown on the touch panel display can be scanned.
2
Enter the width of the frame to erase.
Erasing dark borders in copies of books
You can erase the dark borders both in the center and contour lines that appear when you scan facing pages
in a book.
Scanning
When scanning originals that are smaller than the scanning size, frame lines of the
originals may appear in the scanned image. When scanning a thick book, dark
borders may appear. This function enables you to erase these frame lines and dark
borders. You can also set the machine to not copy punch holes in the originals.
Placing Originals(P. 109)
<Home> Screen(P. 141)
<Erase Frame>.
523
4XR3-088
Scan Basic Features