Canon imageRUNNER ADVANCE C5560i III User Manual page 529

● Press when there are multiple send jobs to display the screen for selecting the send job to cancel. If the
send job you want to cancel is not displayed, press <Check Other Jobs> to display <Send Jobs>. Select the job
that you want to cancel, and press <Cancel>.
To check the statuses for sent/saved documents
● On the <Status Monitor> screen, you can check the statuses for sent/saved documents. This screen enables
you to send/save documents again or cancel sending/saving after checking the statuses.
and Log for Scanned Documents(P. 517)
● When <Display Notification When Job Is Accepted> is set to <On>, the <Status Monitor> screen can be
displayed from the following screen that is shown after a send job is received.
When Job Is Accepted>(P. 1100)
TX ReportTX Report
To print the report for the results of sending/saving
● On the Scan Basic Features screen, pressing <Options>
print the report listing the results of sending/saving.
● To set this for each job from <Options>, it is necessary to select <For Error Only> or <Off> in
Report>(P. 1095) , and then set <Allow Printing from Options> to <On>.
File name
When a file is sent/saved, its file name is automatically set based on the following format. You can change the
setting so that a different name can be assigned.
● When sending by e-mail
"Job numbers (four digits)_page numbers (three digits).file extension name" format, such as "1042_001.jpg"
● When saving in a file server
"The year, month, day, hour, minute, and second the file is saved (14 digits).file extension name" format,
such as "20151030133541.jpg"
E-mail subject
● The subject entered in <Default Subject> is automatically set (
a different subject, change the setting, or specify each time you send an e-mail (
Settings(P. 559) ).
Detect Feeder Multi Sheet Fd.Detect Feeder Multi. Sheet Feed
When multiple sheets are fed
● Scanning is stopped and the message is displayed on the screen. Follow the instructions to clear the jam.
When you have cleared the jam, the resume job screen is displayed. If the machine mistakenly detects
multiple sheet feeding, press <Do Not Detect Multi. Sheet Feed> to resume scanning.
● To set the machine in advance to not notify you of multiple sheet feeding, perform one of the following
operations.
- Each time you send/save a document, press <Options> on the Scan Basic Features screen
Feeder Multi Sheet Fd.> to disable the setting.
- Set <Set Detection of Feeder Multi. Sheet Feed as Default> to <Off> (
Sheet Feed as Default>(P. 1084) ).
TIPS
Orig. Content OrientationOrig. Content Orientation
Scanning
<TX Report> enables you to set to automatically
Setting a File Name(P. 557)
<Default Subject>(P. 1102) ). If you specify
515
Checking Status
<Display Notification
<TX
Specifying E-Mail
select <Detect
<Set Detection of Feeder Multi.