Programmable Functions; Button Lock; Calling Alert; External Speaker - Kenwood ProTalk NX-P1200AV User Manual

PROGRAMMABLE FUNCTIONS

Button Lock

Press and hold this button for 1 second to lock the transceiver buttons.
• Beep A (1 beep) sounds.
Press and hold this button for 1 second again to unlock the transceiver buttons.
• Beep B (2 beeps) sounds.
The following buttons/ functions can still be used when Button Lock is active:
• Button Lock
• Monitor
• Monitor Momentary
• Squelch Off
• Squelch Off Momentary
Note:
◆ The status of this function (enabled or disabled) is retained even if the transceiver is
turned OFF.

Calling Alert

Press this button to send a calling alert to the other party. Calling alert tones help
identify yourself to party members and inform them that you are calling.
• This function can be used when the channel type is "Analog" or "Mixed" (Dual).

External Speaker

If external speaker connected to the transceiver, select the output of the speaker
to the external speaker or internal speaker.
Press this button to switch the external speaker or internal speaker.
Note:
◆ The status of this function (enabled or disabled) is retained even if the transceiver is
turned OFF.
37