Home Channel; Home Channel Select; External Speaker; Led Brightness - Kenwood TK-D740HV User Manual

n Emergency
Places the transceiver into Emergency mode. Emergency mode is used to carry
out emergency actions.
Note:
◆ This function can be programmed only on the key.
n Home Channel
Press this key to immediately select your home channel.
n Home Channel Select
Hold down this key to set the current channel as the Home Channel.
n Fixed Volume
Cycles the various tone levels of the transceiver between low, high, and off.
n External Speaker
Toggles Optional External Speaker ON and OFF.
n Horn Alert
Enables the Horn Alert terminal when a call is received. It activates the car
headlights and horn to alert you of the incoming call when you are away from the
transceiver.
n LED Brightness
Adjust the he display brightness between High, Low, and Off.
n Lone Worker
Toggles Lone Worker mode ON and OFF.
n Monitor
Turns the transceiver signaling off, to listen to all calls that are received on the
channel. Press this key again to turn the transceiver signaling back on.
n Monitor Momentary
Turns the transceiver signaling off while holding down this key. Release this key to
turn the transceiver signaling back on. While signaling is off, you can listen to all
calls that are received on the channel.
n OVCM
Toggles OVCM (Open Voice Channel Mode) between ON and OFF.
n Paging Call
To transmit your PTT ID list, to request a call.
n Priority-channel Select
Enters the Priority-channel Select mode.
12