About The Ts-590Sg Usb Audio Function - Kenwood TS-590SG Setting Manual

1. About the TS-590SG USB Audio Function

When the TS-590SG is connected to the computer using a USB cable, the USB audio
function can be used to play incoming audio over the computer speakers and transmit
audio from the computer microphone.
This setup guide explains how to set up the TS-590SG to use its USB audio function and
how to use the ARUA-10 software to control input/output routes of the USB audio signals
from a computer.
Important
USB audio may be delayed due to unavoidable principles. Consequently, do not

perform operations (such as contests or pile-ups requiring quick responses) for
which delays are likely to be a problem.
Refer to Chapter 5 "Limitations" for other limitations.

 To use the USB audio function, knowledge not only of transceivers but also of
computers is required. JVC KENWOOD does not offer support for purchasing
computers or for customer's computers.
 JVC KENWOOD Corporation shall bear no responsibility for related damage such
as damage caused by missed communications and dialog opportunities due to
incorrect customer settings, nonconformances, or misoperations as a result of
using this document or the ARUA-10 software.
2