Driver Errors - Universal Devices ISY-994i User Manual

23.9.6

Driver Errors

The following sub errors are enumerated in the Control field (column 2) and are related to
errors -200xxx.
Number Error
-1 Failed writing the highwater mark
-2 Failed writing PLM slave link
-3 Failed writing PLM master link
-4 Failed reading device memory
-41 Failed writing device memory
-5 Failed reading device link
-51 Failed writing device link
-6 Failed restoring device from file
-7 Failed initializing node - continuing
-8 Node not added - failed reading links
-9 Node not added - failed removing links
-10 Node not added - failed restoring device
-11 Replace device incomplete
-12 Add device incomplete
-13 Remove device incomplete
-14 Add scene incomplete
-15 Remove scene incomplete
-16 Failed removing PLM master link
-17 Failed removing PLM slave link
-18 Failed removing group link
-19 Failed adding device to scene
-20 Adding device to scene incomplete
-21 Removing device from scene incomplete
-22 Replace failed: failed renaming file
-23 Replace failed: address is null
-24 Restore failed: internal error
-25 Failed removing remaining links
-26 Node already exists
-27 Node does not exist
-28 Incompatible device/firmware types
-29 Failed to fully replace device
-30 Failed resetting the PLM
-31 Failed to fully restore device
Driver Errors
Page | 627