Figure 133: Sunrise/Sunset field set
The Last Run option is an event timer based on the last runtime of the selected program.
Refer to Figure 134: Last Run field set.
Figure 134: Last Run field set
To add a timer event to a program, select or create a new program. Set the time conditions
for the timer event. Click on 'Add to IF' button to place the timer condition in the program.
9.2.4.2Condition
Unlike the Schedule button that that uses the time as a trigger, the condition button uses
the devices or a program to trigger the action. Conditions defined are added to the IF
section.
Figure 135: Device and Program condition select
Page | 148