10.5.13 Set Scene 'node' arg
Description: The 'Set Scene' is the same as the 'Set' command but sends INSTEON
commands to a scene, it is an automatically displayed command when a scene node is
selected.
Category
Action
Sample Code:
Then
Set Scene
Sample Code:
Then
Set Scene
10.5.14 Send X-10 'node/arg' arg
Description: Action The 'X-10' command executes X-10 Commands for the provided X-10
node address.
Category
Action
Sample Code:
Then
Send X-10
Arguments
On, Off, Fast On, Fast Off, Brighten, Dim,
Fade Up, Fade Down, Fade Stop, 1% - 99%,
Query
'All Lights' On
'My Lighting' Query
Arguments
X-10 Commands
'A1/On (3)'
Page | 214