6.6.3.5Configure OpenADR Reports (2.0b)
Figure 81: OpenADR Reports Menu Option
Register All – This option must always be checked since OpenADR 2.0b requires all reports
(status/usage) to be registered at the same time.
Register – if Register All is checked, all report types (status/usage) are registered at the
same time. Otherwise, only that specific report (usage OR status) is registered.
Report registrations are cannot be canceled. So, if there are any changes to any reports,
register button must be clicked again to re-register all reports (replaces the old metadata
information).
ISY will automatically decide what needs to be registered based on the device classes of
devices that are in Auto DR group. For instance, energy monitoring channels or Smart
Meters, only register Telemetry Usage whereas thermostats and load controllers register
Telemetry Status. Some devices may report both.
Page | 83