Is There A Way I Can Control The Lights On A Keypadlinc With Insteon Commands - Universal Devices ISY-994i User Manual

24.1.13 Is there a way I can control the lights on a KeypadLinc with INSTEON
commands?
• If the KeypadLinc button is part of a scene, the lights will turn on/off either from the
GUI (when issuing a scene/group command) or by other controllers linked to it. ISY
does not work as a pass through for INSTEON commands; you can either use our
GUI to perform what you need or our SDKs. In short, no longer do you have to care
about the details of INSTEON commands; we take care of all of it in ISY. And, finally,
you can even group KeypadLinc buttons (mutual exclusivity) using our GUI.
24.1.14 Is the ISY compatible with J2ME; what do I need to access my ISY?
• As a matter of fact, our UDMobile client is based on J2ME (IBM Websphere Micro
Environment Runtime = WEME). The only reason that we do not actively advertise
our UDMobile client is that we have had a hard time figuring out where our clients
can buy the license for WEME. The price for the license is $5.99 and we were told
that users can buy it directly from Handango but it is not listed.
• If you, or anyone else for that matter, is willing to take the responsibility for
acquiring a license for WEME, you can download our UDMobile client: UDMobile-
SD.zip. Installation is pretty straight forward:
o Copy the contents of the zip file into an SD card
o Insert the SD card into your Pocket PC
o Use File Explorer and go to your /SD Card/UDClient or /Storage
Card/UDClient directory
o If your SD directory is called SD Card, then click on UDMSD
o If your SD directory is called Storage Card, then click on UDMStorage
24.1.15 I registered my ISY on your website but did not get a confirmation
email; what shall I do?
• Registration is immediate and you should receive a confirmation immediately. If you
do not receive an email with-in let's say 15 minutes just send us an email to
tech@universal-devices.com and we can check in our "dead letter" queue.
24.1.16 I do have a question regarding the EZRain unit. After linking, I see
groups 1-8, representing the valves 1-8, but do not see any groups for the
four EZRain Zone groups (1-4). I had to set up 6 schedules to turn on each
of the valves, with each start time following 30 min later and then a final
schedule to turn off the last valve 30 min later. It works, but it would be a
lot better if you were able to just set up a start schedule for one of the
Page | 641