Isy Portal/Ifttt/Ring Doorbell - Universal Devices ISY-994i User Manual

• Click on the second column where it says Select to Edit Content. This will bring up
Resource Editor
o Choose https from the first drop down
o Choose POST from the second drop down
o For Host, type maker.ifttt.com
o For Port, choose 443
o For Timeout, use at least 1000 (if you get TCP response failures, increase the
timeout)
o For Path, construct /trigger/<Event Name>/with/key/<Key> ... you need
to replace <Event Name> and <Key> with the values you retrieved in the last
two sections above.
▪ Example, if the Event Name is isyRules and the key is ABCDEF01234,
o If you wish to send optional parameters:
▪ Change the Content Type header to: application/json
▪ Change Encoding to either Raw Text or C-Escaped
▪ In the Body type: { "value1" : "<your value 1>", "value2" : "<your
▪ Where <your value 1>, <your value 2>, and <your value 3> must be
▪ You can also use ISY Substitution Variables that will be replaced by
o Click on the Save e button on Resource Editor
• Click on the Save button to save all your resources to ISY
• Click on the Test button to test your resource
• Once satisfied, you can use the resource referenced by Name in your ISY Programs

ISY Portal/IFTTT/Ring Doorbell

18.7.10
You can use ISY Portal/IFTTT to integrate with
the ISY do any function for example, flash the lights in the house.
• Create a State Variable for use in the ISY. This Variable will show up in ISY Portal in
the dropdown (e.g. RingDoor)
• Set up ISY portal for IFTTT use and create a ISY key for use
then the path would
be /trigger/isyRules/with/key/ABCDEF01234
value 2>", "value3" : "<your value 3>" }
replaced with whatever parameter you wish to send to IFTTT
ISY at run time before submission to IFTTT
Ring Doorbell! For instance, you can have
Page | 489