Compatibility - Universal Devices ISY-994i User Manual

Home automation

Hide thumbs Also See for ISY-994i:

Table of Contents

24.5 Compatibility

Is the ISY compatible with SimpleHomeNet products?

ISY works with most SimpleHomeNet products. As a matter of fact, with ISY, you can link an

EZRain Sprinkler valve to a button on a controller (KeypadLinc, ControLinc, etc.). We are

currently working on supporting EZIO such that you could either link the dry contacts

(inputs) to another (linkable) INSTEON device or use Triggers to do a series of actions (up

to 6) based on EZIOs inputs. In any case, since the firmware is upgradable over the

network, you should rest assured that all enhancements will be notified to registered users

and thus you can upgrade your product for every new supported product/feature.

Is this unit compatible for Europe? Even if it is not CE certified, will it

• ISY's processor board is CE certified. The ISY is a 5/6 volt, 300 milliamps, DC device

so you could use a power transformer that would match the needed voltage and

current requirements. On the other hand, the INSTEON products would need

voltage/phase/frequency converters. So yes, it could work but would require some

serious workarounds. See Note Below

Are X-10 single phase 110V/120V or two phase 220V/230V devices

• The ISY does now support X-10. X-10 single phase 110V/120V is compatible.

24.6 Specifications

Freescale 5270 running at 100Mhz

2 Serial Ports: one for communications with PLM and one with a Shell which allows

administrative functions

SD Card Module: Up to 16GB holds a regular FAT file system

QSPI, I2C, PWM, and GPIO input outputs available

Real Time Clock on board